To begin with, we need to connect the TP-Link extender to your computer with an Ethernet cable.The Welcome message allows you to choose your language, followed by the first step you need to take and that is to connect the router to your computer.
Review the network settings in the final window and select Finish if all correct.Here is how to connect a TP-Link router to NordVPN using the L2TP protocol: 1.
Select your wireless network from the list that is generated and select Next.Plug the TP-Link extender into a power outlet close to your wireless router.Before we do anything with the extender, we need to identify the router IP address, the Wi-Fi SSID (broadcast name), the type of encryption it.How to configure the basic wireless settings of TP-Link wireless DSL router.
The images of the Interface setup settings- guide for Internet Setting, LAN setting and Wireless Settings are shown.Some TP-Link extenders also have WPS buttons so you can use this to set it up.
Test it first with the Ethernet cable and then without it using wireless.The main router will be connected to the TP-Link N router via LAN port (as seen below).
By physically pressing the WPS button, you tell the router that you are authorizing it to connect with a device that has also had Wi-Fi Protected Setup enabled.Up next, you are required to place the Internet cable into the device and to power it on, then to identify if the router is properly installed by monitoring the flashes according to a chart.TP-Link Customer Service Provides Free Support For TP-Link Setup issues.You should always see 3 green check marks if the device you are using to visit the account home is set up.PureVPN has developed a simple tutorial so you can know how to setup static routes on TP-LINK routers.